Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Modification of the wood-plastic composite for enhancement of formaldehyde clearance and the 3D printing application

As the formaldehyde is one of the main indoor pollutants, the purpose of this study is to effectively remove indoor formaldehyde pollution by using environmentally friendly 3D printing ornaments. The wood 3D printing filaments cellulose/polylactic acid composite (Cellu/P) was selected as the starting material, and 3-aminopropyltriethoxysilane (APTES) was used for chemical modification to obtain a series of cellulose composite materials with amino groups. The modified composite materials (APTES@Cellu/P) were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscope, energy dispersive spectroscopy, thermogravimetric analysis, and mechanical tests, and a formaldehyde removal experiment was performed. The feasibility of 3D printing was evaluated, and the process of 3D printing-functionalized customized ornaments was proposed, and then a school emblem was used for modeling, printing, and surface modification. Compared with the commercially traditional activated carbon, 3D printing-customized ornaments of APTES@Cellu/P material has a better formaldehyde removal effect, and can even avoid the secondary pollution that is common to the activated carbon.     

An Injectable Hydrogel for Simultaneous Photothermal Therapy and Photodynamic Therapy with Ultrahigh Efficiency Based on Carbon Dots and Modified Cellulose Nanocrystals

The convenience of injectable hydrogels that can provide high loading of diverse phototherapy agents and further long-time retention at the tumor site has attracted tremendous interest in simultaneous photothermal and photodynamic cancer therapies. However, to incorporate the phototherapy agents into hydrogels, complex modifications are generally unavoidable. Moreover, these phototherapy agents usually suffer from low efficiency and work at different irradiation wavelengths outside the near infrared windows. Hence, a method for the fabrication of an injectable hydrogel for simultaneous photothermal therapy and photodynamic therapy, through the Schiff-base reaction between amido modified carbon dots (NCDs) and aldehyde modified cellulose nanocrystals is proposed. The NCDs act as both phototherapy agents and crosslinkers to form hydrogels. Significantly, the NCDs demonstrate an extremely high photothermal conversion efficiency of 77.6% which is among the highest levels for photothermal agents and a high singlet quantum yield of 0.37 under a single 660 nm light-emitting diode irradiation. The hydrogels are examined through in vitro and in vivo animal experiments which show nontoxic and effectively tumor inhibition. Thus, the strategy of direct reaction of phototherapy agents and the matrix not only provides new strategies for injectable hydrogel fabrication but paves a new road for advanced tumor treatment.     

Synthesis,Characterization, Speciation,and Biological Studies on Metal Chelates of Carbohydrates with Molecular Docking Investigation

The role of starch aerogel (St-AG) and carboxymethyl cellulose (CMC) as biolgical active compounds, when they subjected for complexation with metal ions, is assessed in this work. The complexation is carried out with palladium(II) and copper(II) ions, in solid state. Different tools of analysis are carried out to characterize and elucidate the structures of these complexes, namely: elemental analysis, IR, thermal analysis, magnetic measurement and molar conductance techniques. All synthesized complexes are formed with 1:2 (metal:ligand) stoichiometry except the case of aerogel starch 1:1 (Pd:starch). All isolated complexes show a satisfactory cytotoxic effect results against colon cancer cell lines HCT11. Additionally, these complexes are screened for their antibacterial activities against two types of Gram positive and negative bacteria. Molecular docking investigation confirmed the cytotoxicity and antibacterial results. Proton–ligands association constants and their complex formation constants with some bivalent metal ions, using potentiometric method show that the complexes formed in solution have a stoichiometry of 1:1 [metal:ligand]. The effects of metal ion, ionic radius, electronegativity and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3D transition metals followed the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺.     

Fabrication of bacterial cellulose with high efficient loading of Ag and TiO2 nanoparticles for removing organic dyes

As a new advanced oxidation technology, photocatalytic technology has broad application prospects in the field of wastewater treatment. However, in the actual use process, there will be difficulties in catalyst recovery and reuse. This article successfully prepared bacterial cellulose (BC) loaded silver and titanium dioxide nanoparticles (Ag-plated TiO₂/BC composite pellicle) by in situ embedding method. BC not only works as the carrier to load TiO₂ and Ag NPs but also adsorbs dyes to promote the reaction. As a reusable photocatalytic film, it is convenient to use and recycle in terms of testing and characterization compared with powders. The results show that Ag and TiO₂ nanoparticles were closely embedded in BC. We evaluated the photocatalytic degradation performance of the catalyst on methylene blue (MB), active red X-3B, and Rhodamine B. When the reaction time was 2 h, the dye removal rates were 71%, 68%, and 82.6%. At the same time, through the inhibition zone experiment, it was found that the material has a certain inhibitory effect on both Escherichia coli and Staphylococcus aureus. Therefore, the supported catalyst prepared by this method has the advantages of high catalytic activity, relatively stable property, easy recovery, and tailorability, making it potentially applicable in sewage post-treatment links.     

纤维素催化热解定向调控制取不含氧烃类液体燃料

为了将生物质能高效转化为高品位不含氧的液体燃料,以纤维素为例,研究了以催化热解方式将热解产物转化为芳香烃类液体燃料的过程.实验发现,纤维素热解产生的含氧有机小分子,可以通过催化热解的形式高效转化为不含氧的芳香烃类液体.催化剂采用HZSM-5(23)、催化剂原料质量比例为5∶1、热解温度为650℃、升温速率为10000 K/s的工况为纤维素催化热解的最佳工况,单环芳烃、多环芳烃产率分别为9.90%和12.91%,总芳香烃类产率为22.81%.热解温度提升至650℃前,更高的热解温度能获得更高的芳香烃产率.继续提高热解温度,单环芳烃、多环芳烃分子间还可能进一步发生聚合反应,最终产生积碳.同时本文也提出了一种可行的纤维素催化热解中的反应途径,与本文实验结果较为匹配.     

细菌纤维素合成与鉴定研究综述

细菌纤维素（BC）因其独特性能被广泛应用于医药、食品等领域，目前其高产量菌株筛选、合成成本降低及合成途径改良等成为研究热点。本文依据国内外文献并结合团队研究成果对BC合成与鉴定的相关研究进行综述。首先对BC合成菌筛选及碳源利用的研究进行了分析，总结了降低BC合成成本的研究思路。其次对鉴定菌株合成产物的方法进行了归纳，总结了不同方法的特点。然后结合本团队筛选出的BC生产菌XJL-06-4 BC合成酶基因分析结果，综述了BC合成途径、合成酶存在形式以及基因水平调控作用，为BC在分子水平上通过改变合成途径提高产量提供新思路。最后，总结BC微生物发酵生产存在的问题，多角度提出解决方案。     

氨基磺酸盐型水性醋酸纤维乳液的制备与性能

采用乙二胺基乙磺酸钠(AAS)作为亲水剂,在二月桂酸二丁基锡(DBTDL)的催化下,通过异佛尔酮二异氰酸酯(IPDI)将亲水基引入二醋酸纤维(CA)分子中,制得了一种氨基磺酸盐型水性醋酸纤维乳液(SWCA)。利用FTIR、DLS、黏度计、TEM、SEM、接触角测量仪、XRD、TGA,对SWCA结构及涂膜性能进行表征。考察了IPDI与AAS物质的量比对SWCA乳液粒径、黏度、涂膜表观形貌及耐水性的影响。结果表明:当n(IPDI)∶n(AAS)=1.1∶1时,乳液最稳定,微观形态呈水包油型(O/W)核壳结构,乳液粒径和分散系数(PDI)最小,分别为128nm和0.112,此时乳液表观黏度最大,为73.5m Pa·s,所成涂膜致密平整,接触角可达110.2°±2°,表现出明显的疏水性;此外,与二醋酸纤维相比,SWCA涂膜结晶性减弱,呈微晶态或次晶态结构,且具有较好的耐热性。